返回浏览

2018/01/15

汉高Henkel乐泰Loctite胶水CATALYSTS17 28 43 27-1 24lv 23lv CHANGBO

本文来自：汉高乐泰胶水（中国）有限公司 Henkel Loctite官网 www.loctite.net/c1209.html

STANDARD CATALYSTS

FOR EMERSON & CUMING™ BRAND PRODUCTS

CATALYST 9 11 14 15Type Modifiedaliphatic Modified aromatic Anhydride Polyamide

amine amine

Viscosity 80 – 100 mPa.s 35 – 60 mPa.s (at Powder 20 – 40 Pa.s

35ºC)

Color Amber Tan to dark brown White Black

Density (g/cm)3 0.99 – 1.01 1.0 – 1.1 0.77 – 0.79 0.95 – 0.98

Amount of Catalyst used 1.00 1.20 2.5 7.0–21.1

in relation to Catalyst 9

(in x CATALYST 9)

Pot life 45 min 4 h 24 h 2 h

(100 g at 25ºC)

Shelf life at RT 1 year in unopened 1 year in unopened 1 year in unopened 1 year in unopened

containers containers containers containers

Cure Schedule 16 to 24 h at RT 2 h at 100ºC 3 h at 150ºC 16 to 24 h at RT

or + + or

2 h at 65ºC 4 h at 150ºC 3 to 16 h at 180ºC 2 h at 80ºC

Service Temperature (ºC)

-Continuous 130 180 180 90

- Intermittent 150 200 200 120

Advantages Chemicalresistant Outstanding chemical High temperature RT cure

Physical Strength resistance performance Adjustable flexibility

RT Cure Physical strength Chemical resistance Pot life

Low viscosity Pot life Pot life Low toxicity

Low cost Low viscosity Wide mixing ratio

High temperature Low cost

performance

Thermal shock

resistant (in some

cases)

Disadvantages Brittle (not good for Elevated temperature High temperature High viscosity

low temperature) cure cure Softens at elevated

Pot life Stains skin Odor temperatures

Toxicity May crystallize at RT

(heat to 65ºC to

liquefy)

Cost

Toxicity

Other comments Good all-round epoxy CATALYST 11 is Keep away from Easiest epoxy

curative subject to partial moisture curative to use

crystallization at RT Can mix with epoxy

To remove crystals even without

warm gently to at sophisticated

least 65ºC and weighing equipment

maintain until all

crystals have gone

into solution

Storage is possible

for several days at RT

without crystallization

Technical Data

Page1 of 4 CATALYSTS

Page 2 of 4

CATALYST 15LV 17 23 LV 24 LVType Polyamide Anhydride Modifiedaliphatic Modified aliphatic

amine amine

Viscosity 5 – 15 Pa.s Slurry (at 35ºC) 20 – 30 mPa.s 30 – 40 mPa.sColor Black Blue – grey Water-white to slight Water-white to slight

amber amber

Density (g/cm)3 0.95 – 0.98 1.3 – 1.5 1.0 – 1.03 1.0 – 1.03

Amount of Catalyst used 3.5 – 14.0 2.8 2.00 2.00

in relation to Catalyst 9

(in x CATALYST 9)

Pot life 2 h 24 h 60 min 30 min

(100 g at 25ºC)

Shelf life at RT 1 year in unopened 1 year in unopened 1 year in unopened 1 year in unopened

containers containers containers containers

Cure Schedule 16 to 24 h at RT 3 h at 120ºC 16 to 24 h at RT 8 to 16 h at RT

or + or or

2 h at 80ºC 2 h at 150ºC 4 h at 65ºC 2 h at 65ºC

16 h at 175ºC

Service Temperature (ºC)

-Continuous 65 230 105 105

- Intermittent 90 (260) 120 120

Advantages RT cure Very good high Low viscosity Low viscosity

Adjustable flexibility temperature Low cost Thermal shock

Pot life performance Thermal shock resistant

Low toxicity Pot life resistance Tough impact

Wide mixing ratio Low viscosity Pot life resistant

Low cost Tough impact Low color

resistance

Low color

Disadvantages Softens at elevated Elevated temperature Longer cure at RT Pot life

temperature cure than CATALYST 24 Cost

High cost LV

Other comments Easiest epoxy CATALYST 17 may Has tendency to

curative to use be solid at RT semi-thixotrope

Can mix with epoxy When warmed to various epoxy

even without 65ºC, it will liquefy. systems

sophisticated Cool down to room

weighing equipment temperature before

use

Europe North America Asia-PacificNijverheidsstraat 7 45 Manning Road 100 Kaneda, Atsugi-shiB-2260 Westerlo Billerica, MA 01821 Kanagawa-ken, 243Belgium Tel 800-832-4929 Japan

Tel +(32)-(0) 14 57 56 11 Tel (978) 436-9700 Tel (81) 462-25-8815Fax: +(32)-(0) 14 58 55 30 Fax: (978) 436-9701 Fax: (81) 462-22-1347 CATALYSTS

Page 3 of 4

CATALYST 27-1 28 30 43

Type Modifiedaromatic Modified aromatic Modified aliphatic Imidazole / aliphatic

amine amine amine amine

Viscosity 250 – 300 mPa.s 250 – 300 mPa.s 70 – 90 mPa.s 40 – 60 mPa.sColor Brown Brown Slightamber Amber

Density (g/cm)3 1.0 – 1.05 1.0 – 1.05 0.92 – 0.96 0.90 – 1.10

Amount of Catalyst used 1.75 1.75 2.70 0.75

in relation to Catalyst 9

(in x CATALYST 9)

Pot life 2 h 2.5 – 3 h 60 min 40 min

(100 g at 25ºC)

Shelf life at RT 1 year in unopened 1 year in unopened 1 year in unopened 1 year in unopened

containers containers containers containers

Cure Schedule 4 h at 120ºC 4 h at 120ºC 24 h at RT 16 to 24 h at 65ºC

or or

4 h at 65ºC 2 to 4 h at 150ºCService Temperature (ºC)

-Continuous 175 175 90

- Intermittent 200 200 120 205

Advantages Chemicalresistance Chemical resistance Non-blushing High temperature

Physical strength Physical strength Resilient (more than resistant

Pot life Pot life CATALYST 9) Low cure temperature

High temperature High temperature Low viscosity

performance performance RT cure

Low color

Disadvantages Elevated temperature Elevated temperature Cost Brittleness

cure cure

Cost Cost

Other comments Non-staining Non-staining Excellent epoxy Non-staining

alternative for alternative for curative if alternative for

CATALYST 11 ; CATALYST 11 appearance is CATALYST 11

Cannot be used in important

combination with the

following products:

STYCAST™ 2057™ /

STYCAST™

2651MM™ Series /

STYCAST™

2741LV™ /

STYCAST™ 3050™ /

STYCAST™ 45LV™

Europe North America Asia-PacificNijverheidsstraat 7 45 Manning Road 100 Kaneda, Atsugi-shiB-2260 Westerlo Billerica, MA 01821 Kanagawa-ken, 243Belgium Tel 800-832-4929 Japan

Tel +(32)-(0) 14 57 56 11 Tel (978) 436-9700 Tel (81) 462-25-8815Fax: +(32)-(0) 14 58 55 30 Fax: (978) 436-9701 Fax: (81) 462-22-1347 CATALYSTS

Page 4 of 4

Note

The data contained herein are furnished for information only and are believed to be reliable. We cannot assumeresponsibility for the results obtained by others over whose methods we have no control. It is the user'sresponsibility to determine suitability for the user's purpose of any production methods mentioned herein and toadopt such precautions as may be advisable for the protection of property and of persons against any hazards thatmay be involved in the handling and use thereof. In light of the foregoing, Henkel Corporation specificallydisclaims allwarranties expressed or implied, including warranties of merchantability or fitness for aparticular purpose, arising from sale or use of Henkel Corporation’s products. Henkel Corporationspecifically disclaims any liability for consequential or incidental damages ofany kind, including lostprofits.The discussion herein of various processes or compositions is not to be interpreted as representation thatthey are free from domination of patents owned by others or as a license under any Henkel Corporation patents thatmay cover such processes or compositions. We recommend that each prospective user test his proposedapplication before repetitive use, using this data as a guide. This product may be covered by one or more UnitedStates or foreign patents or patent applications.

Trademark usage

Except as otherwise noted, all trademarks in this document are trademarks of Henkel Corporation in the U.S. andelsewhere. ® denotes a trademark registered in the U.S. Patent and Trademark Office.

Europe North America Asia-PacificNijverheidsstraat 7 45 Manning Road 100 Kaneda, Atsugi-shiB-2260 Westerlo Billerica, MA 01821 Kanagawa-ken, 243Belgium Tel 800-832-4929 Japan

Tel +(32)-(0) 14 57 56 11 Tel (978) 436-9700 Tel (81) 462-25-8815Fax: +(32)-(0) 14 58 55 30 Fax: (978) 436-9701 Fax: (81) 462-22-1347

上一页：汉高Henkel乐泰Loctite胶水Catalyst2762Amber STYCAST

置顶