乐泰LOCTITE3423胶水英文资料参数数据 - 汉高乐泰胶水(中国)有限公司 Henkel Loctite官网
2018/04/28

乐泰LOCTITE3423胶水英文资料参数数据

乐泰LOCTITE3423胶水英文资料参数数据

  乐泰LOCTITE3423胶水英文资料参数数据:

 本文来自:汉高乐泰胶水(中国)有限公司 Henkel Loctite官网 www.loctite.net/c1360.html

TechnicalDataSheet

    LOCTITE® EA 3423™

    KnownasLoctite®3423™

    November-2014PRODUCTDESCRIPTION    MixedProperties

    ®    PotLife  @25°C, minutes:

LOCTITE   EA  3423™ provides  the following product

    200 gmass    30 to60LMScharacteristics:

Technology    Epoxy

ChemicalType    Epoxy

Appearance(Resin)    GreypasteLMS

    LMS    TYPICALCURINGPERFORMANCE

Appearance(Hardener) Beigepaste    FixtureTime

Appearance(Mixture)   Greypaste    FixturetimeisdefinedasthetimetodevelopashearstrengthComponents    Twopart-Resin&Hardener    of0.1N/mm².

Viscosity    Thixotropic    FixtureTime, @22°C, hours    3

MixRatio,byvolume-  1:1

Resin:Hardener    CureSpeedvs.Time/Temperature

MixRatio,byweight-   100:70    ®

Resin:Hardener    LOCTITE  EA 3423™ develops high strength at roomCure    Roomtemperaturecureaftermixing    temperaturewithin12hours. TherateofcurewilldependonApplication    Bonding    theambienttemperature,elevatedtemperaturesmaybeusedKeySubstrates    Metals,Ceramics,Rigidplastics and    toacceleratethecure.Thegraphbelowshows theshear

    Wood    strengthdevelopedwithtimeongritblastedsteellapshearsat

    ®    differenttemperaturesandtestedaccordingtoISO4587.LOCTITE  EA 3423™isa twocomponent, highviscosity,

    S125

thixotropicepoxyadhesivewhichcuresatroomtemperature

aftermixing.Itisageneralpurpose,nonsagadhesivewhich    M

    B   80 °/ 100 °C

    G100

developshighstrengthonawiderangeofsubstrates.The

    n    40 °C    25 °C

thixotropic properties enablethisadhesivesystem tobond    o

    h

    t  75

roughverticalsurfacesmadefrommetal,ceramic,rigidplastics

    g

or woodthrough gaps of up to 3 mm. When cured, the    n

    e

    r

    t  50

adhesivecanbesandedtoasmoothfinish.

    S

    l

    l

TYPICALPROPERTIESOFUNCUREDMATERIAL    u

    F 25

ResinProperties    f

    LMS    o

SpecificGravity@25°C    1.3 to1.36

    % 0

FlashPoint-SeeSDS    5min10min 30min1h 3h 6h    24h  72h1wk   1mthViscosity,Brookfield -RVT, 25°C,mPa·s(cP):    Cure Time

 Spindle7,speed5rpm    100,000 to400,000

Hardener Properties    TYPICALPROPERTIESOFCUREDMATERIAL

    LMS    4 mmthicksamplescuredfor7 days @22°C

SpecificGravity@25°C    0.95 to1    PhysicalProperties:

FlashPoint-SeeSDS    -1

Viscosity @25°C,Cone&PlateRheometer,mPa·s(cP):    CoefficientofThermalExpansionISO11359-2,K:

    TemperatureRange:20°C to35°C    31×10-6ShearGradient:30s-1    70,000 to110,000LMS

    TemperatureRange:85°C to200°C    192×10-6Viscosity,Brookfield -RVT, 25°C,mPa·s(cP):

 Spindle7,speed5rpm,    200,000 to500,000

    1.2 mmthicksamplescuredfor7 days @22°C

    PhysicalProperties:

    CoefficientofThermalConductivity, ISO8302,    0.28

    W/(m-K)

    ShoreHardness,ISO868,Durometer D    70 to80    TDSLOCTITE®EA3423™,   November-2014GlassTransitionTemperature,ASTM E1640,°C   55    HotStrength

  Elongation,ISO527-3,%    2    Testedattemperature

  TensileStrength,ISO527-3    N/mm²   24    30

    (psi)       (3,500)    ²

    m25

  TensileModulus,ISO527-3    N/mm²   1,500

    m

    (psi)       (220,000)    /

    N 20

  Compressive Strength,ISO604    N/mm²   64    -

    (psi)       (9,300)    h

    t

    g 15

 ElectricalProperties:    n

    e

    15    r

  VolumeResistivity,IEC60093,Ω·cm    30×10    t

    10

    15    S

  SurfaceResistivity,IEC60093,Ω    400×10    r

  DielectricConstant/DissipationFactor,IEC60250:    a

    5

   1-kHz    2.9/0.01    h

   1-MHz    2.7/0.02    0

   10-MHz    2.7/0.02    -55  -35  -15   5   25   45   65   85   105

    Temperature, °C

TYPICALPERFORMANCEOFCUREDMATERIAL    HeatAging

AdhesiveProperties    Curedfor5 days @22°C.Storedattemperaturesindicatedandtested

    at22°C.

Curedfor7 days @22°C,testedat22°C.    175

    C    100 °C

 LapShearStrength,ISO4587:    °

  Steel (gritblasted)    N/mm²   15 to19    2150

    (psi)       (2,200 to2,800)    125 °C    150 °CStainlesssteel (gritblasted)    N/mm²   13 to17.5    h@125

    t 100

    (psi)       (1,900 to2,500)

  Aluminum (abraded)    N/mm²   7 to12    n

    r  75

    (psi)       (1,000 to1,700)

    S

  Aluminum  (etched)    N/mm²   7 to11    l

    a 50

    (psi)       (1,000 to1,600)    i

    i

  GalvanizedSteel (HD)    N/mm²   5 to11    In    200 °C

    (psi)       (730 to1,600)    25

    % 0

  Zincdichromate    N/mm²   6.5 to10.5    0    500   1000   1500   2000   2500   3000

    (psi)       (940 to1,500)    Exposure Time, hours

  Brass    N/mm²   4 to12

    (psi)       (580 to1,700)

  GRP (smoothskimside)    N/mm²   0.6 to1.2    Chemical/SolventResistance

    (psi)       (90 to170)    Immersedinconditionsindicatedandtestedat22°C.

  Phenolic    N/mm²   1 to1.8    %ofinitialstrength

    (psi)       (150 to260)

  ABS    N/mm²   0.5 to1.1    Environment    °C    100h    400h    1000h

    (psi)       (70 to160)    Motoroil    22    90    90    50Polycarbonate    N/mm²   1 to4    AceticAcid,10%    22    85    80    60

    (psi)       (150 to580)    SodiumChloride,7.5%  22    100    100    55Hardwood(Mahogany)    N/mm²   5 to13

    (psi)       (730 to1,900)    SulfuricAcid,6.5%    22    100    90    80Softwood(RedDeal)    N/mm²   6 to12    Water    60    85    85    80

    (psi)       (870 to1,700)    Water    90    90    70    60180°PeelStrength,ISO8510-2:    Humidity,98%RH    40    100    100    100MildSteel  (gritblasted)    (Nl/m/inm)          21 to.43 to17.1)

    GENERALINFORMATION

    Thisproductisnotrecommendedforuseinpureoxygen

    and/oroxygenrichsystemsandshouldnotbeselectedasTYPICALENVIRONMENTALRESISTANCE    asealantforchlorineor otherstrongoxidizingmaterials.Curedfor7 days @22°C    Forsafehandlinginformationonthisproduct,consulttheLapShearStrength,ISO4587:    MaterialSafetyDataSheet,(MSDS).

  MildSteel (gritblasted)

    sWuhrferceesaquefoours wbaosnhiinngg,syitsteismsimportantare usedtotocheckclean tfhoer

    compatibility ofthewashingsolutionwiththeadhesive.  In

    somecasestheseaqueouswashescanaffectthecureand

    performanceoftheadhesive.

Americas    Europe    Asia+860.571.5100    +49.89.320800.1800    +86.20.3623.0506

    Forthemostdirectaccesstolocalsalesandtechnicalsupportvisit: www.loctite.net/cs-xinwenzhongxin1.html    TDSLOCTITE®EA3423™,   November-2014Directionsforuse    Conversions

 1. For bestperformancesurfaces for bonding shouldbe    (°Cx1.8)+32=°F

    clean,dryandfreeofgrease. Forhighstrengthstructural    kV/mmx25.4=V/mil

    bonds,specialsurfacetreatmentscanincreasethebond    mm/25.4=inches

    strengthanddurability.    Nx0.225=lb

 2. Touse,resinandhardenermustbeblended.Productcan    N/mmx5.71=lb/in

    beapplieddirectlyfrom dual cartridges bydispensing    N/mm²x145=psi

    throughthemixerheadsupplied. Discardthefirst3 to5    MPa=N/mm²

    cm of bead dispensed.  Using bulk containers, mix    MPax145=psi

    thoroughly by weight or volume in the proportions    N·m x 8.851= lb·in

    specifiedin theProduct DescriptionMatrix. For hand    N·mx0.738=lb·ft

    mixing,weighormeasureoutthedesiredamountofresin    N·mm x0.142=oz·in

    andhardenerandmixthoroughly. Mixapproximately 15    mPa·s=cP

    secondsafteruniformcolorisobtained.    Disclaimer

 3. Itis recommendedthatthisproductis notmixed and    Note:

    curedinbulkquantitiesofgreaterthan4 kgasexcessive    Theinformation provided inthisTechnicalData Sheet(TDS)includingthe

    heatbuild-upcanoccur. Mixingsmaller quantitieswill    recommendationsforuseandapplicationoftheproductarebased onour

    minimizetheheatbuild-up.    knowledgeandexperienceoftheproductasatthedateofthisTDS.Theproduct4. Applytheadhesiveasquicklyaspossibleaftermixingto    canhaveavarietyofdifferentapplicationsaswellasdifferingapplicationand

    twhorrkifnogrec,onnodtitlionlseifnorytohurseunitvirboilnitmyeonftothratraordeubtefyoorntdheourocdouncttriol.pHreonckeslsiss,

    onesurfacetobejoined. Formaximumbondstrength    andconditionsinrespectofwhichyouusethem,aswellastheintended

    applyadhesiveevenlytobothsurfaces. Partsshouldbe    applicationsandresults.Westronglyrecommendthatyoucarryoutyourown

    assembledimmediatelyaftermixedadhesivehas been    priortrialstoconfirmsuchsuitabilityofourproduct.

    applied.    AnyliabilityinrespectoftheinformationintheTechnicalDataSheetoranyother5. Forworkinglifepleaseseesection'TypicalPropertiesof    writtenororalrecommendation(s)regardingtheconcernedproductisexcluded,

    Uncured Material'.  Higher temperatures and larger    exceptifotherwiseexplicitlyagreedandexceptinrelationtodeathorpersonal

    quantitieswillshortenthisworkingtime.    injurycausedbyournegligenceandanyliabilityunderanyapplicablemandatory

    productliabilitylaw.

 6. Keeptheassembledpartsfrommovingduringcure.The    IncaseproductsaredeliveredbyHenkelBelgiumNV,HenkelElectronic

    jointshouldbeallowedtodevelopfull strengthbefore    MaterialsNV,HenkelNederlandBV,HenkelTechnologiesFranceSASand

    subjectingtoanyserviceloads.    HenkelFranceSApleaseadditionallynotethefollowing:

    IncaseHenkelwouldbeneverthelessheldliable,onwhateverlegalground,7. Excessuncuredadhesivecanbewipedawaywithorganic    Henkel’sliabilitywillinnoeventexceedtheamountoftheconcerneddelivery.

    solvent(e.g.Acetone).    IncaseproductsaredeliveredbyHenkelColombiana,S.A.S.thefollowing8. After use and before adhesive hardens, mixing and    disclaimerisapplicable:

    rTehceoinfornmdaattiioonnsforuseandapplicationoftheproductarebasedprovided inthisTechnicalData Sheet(TDS)includinngthuer

    applicationequipmentshouldbecleanedwithhotsoapy    knowledgeandexperienceoftheproductasatthedateofthisTDS.Henkelis,

    water.    therefore,notliableforthesuitabilityofourproductfortheproductionprocesses

    LMS    andconditionsinrespectofwhichyouusethem,aswellastheintendedLoctiteMaterialSpecification    applicationsandresults.WestronglyrecommendthatyoucarryoutyourownLMSdated July-26,2005. Testreportsfor eachbatchare    priortrialstoconfirmsuchsuitabilityofourproduct.

availablefortheindicatedproperties. LMStestreportsinclude    AnyliabilityinrespectoftheinformationintheTechnicalDataSheetoranyotherselected QC test parameters considered appropriate to    writtenororalrecommendation(s)regardingtheconcernedproductisexcluded,specificationsforcustomeruse. Additionally,comprehensive    exceptifotherwiseexplicitlyagreedandexceptinrelationtodeathorpersonalcontrols are in place to assure product quality  and    inrjouryucctaliuasbeilditybylaowu.rnegligenceandanyliabilityunderanyapplicablemandatoryconsistency. Specialcustomerspecificationrequirementsmay    IncaseproductsaredeliveredbyHenkelCorporation,ResinTechnologybecoordinatedthroughHenkel Quality.    Group,Inc.,orHenkelCanadaCorporation,thefollowingdisclaimeris

    applicable:

Storage    ThedatacontainedhereinarefurnishedforinformationonlyandarebelievedtoStoreproductintheunopenedcontainer inadry location.    bereliable.Wecannotassumeresponsibilityfortheresultsobtainedbyothers

    overwhosemethodswehavenocontrol.It istheuser'sresponsibilitytoStorageinformationmaybeindicatedontheproductcontainer    determinesuitabilityfortheuser'spurposeofanyproductionmethodsmentionedlabeling.    hereinandtoadoptsuchprecautionsasmaybeadvisablefortheprotectionof

    propertyandofpersonsagainstanyhazardsthatmaybeinvolvedinthehandlingOptimalStorage:8°Cto21°C. Storagebelow8°Cor    andusethereof.Inlightoftheforegoing,HenkelCorporationspecifically

    disclaims allwarrantiesexpressedorimplied, includingwarrantiesofgreaterthan28°Ccanadverselyaffectproductproperties.    merchantabilityorfitnessforaparticularpurpose,arisingfromsaleoruse

    of Henkel Corporation’s products. Henkel Corporation specificallyMaterialremovedfromcontainersmaybecontaminatedduring   disclaimsanyliabilityforconsequentialorincidentaldamagesofanykind,use. Donotreturnproducttotheoriginalcontainer. Henkel    inoclupdoisnitgionsisnottobeinterpretedasrepresentationthattheyarefreefromlost profits. The discussion herein of various processes orCorporationcannot assumeresponsibilityfor product which   dominationofpatentsownedbyothersorasalicenseunderanyHenkelhasbeencontaminatedorstoredunderconditionsotherthan   Corporation patentsthat maycoversuch processesorcompositions. Wethosepreviouslyindicated.Ifadditionalinformationisrequired,    recommendthateachprospectiveusertesthisproposedapplicationbeforeplease contact your local Technical Service Center  or    reopretitivneituse,tuastinsgotrhfisrdeaitanastaengtusidre.Tathisntprodluiccttmioanys.becoveredbyoneorCustomerServiceRepresentative.    Trademarkusage

    Exceptasotherwisenoted,alltrademarksinthisdocumentare trademarksof

    HenkelCorporationin theU.S. andelsewhere.   ® denotesa trademark

    registeredintheU.S.PatentandTrademarkOffice.

    Reference1.3

Americas    Europe    Asia+860.571.5100    +49.89.320800.1800    +86.20.3623.0506

    Forthemostdirectaccesstolocalsalesandtechnicalsupportvisit: www.loctite.net/cs-xinwenzhongxin1.html

上一页:乐泰loctite EA3423环氧树脂胶水中文资料应用